Communication Components Inc.

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI Customer Portal

CCI

News

Support

Bi-Sector™ Array Antennas

In the Americas

Sales


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Customer Service


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Technical Support


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Datasheet

Wideband Bi-Sector^TM Array

BSA33R-E5A

Five foot (1.5 m), Wideband, four port Bi-Sector^TM Antenna. Deploying a high performing pair of CCI’s Patented Asymmetrical 33° Shaped Beams covering 1695-2690 MHz frequencies
Four wide High Band ports (2 ports per beam) covering 1695-2690 MHz and in a single antenna
Full Spectrum Compliance for 1695-2690 MHz Operations
LTE Optimized Asymmetric Shaped Beams for improved LTE data throughput by minimizing beam crossover, providing for an efficient use of valuable radio capacity and frequency spectrum
LTE Optimized FBR, SPR and Boresight/Sector XPD Performance, essential for today’s LTE Data Networks
Exceeds minimum PIM performance requirements
Equipped with new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
Equipped with Two Field Replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET)
Ordering options for External RET Controllers (Type 1) or Internally Integraged RET Controllers (Type 17) or VET manual knobs

Overview

This version of the CCI Bi-Sector^TM Wideband Array is a four port antenna, with four wide High Band ports (two per beam) covering 1695-2690 MHz. The CCI Bi-Sector^TM array uses a pair of CCI’s High Performing Patented Asymmetric 33° Shaped Beams in the High Band frequencies. The CCI Bi-Sector^TM Array thus provides the capability to deploy Dual (over split beams) 2×2 Multiple-input Multiple-output (MIMO) in the High Band. The CCI Bi-Sector^TM Array utilizes two RET controllers, with a separate RET controller for each of CCI’s Patented Asymmetric 33° Shaped Beams.

The CCI Bi-Sector^TM Wideband Array, allow operators to reduce antenna count and replace existing 65° networks, while increasing cell site capacity and LTE data throughput by minimizing overlap between CCI’s Patented Asymmetric 33° Shaped Beams. This design approach lowers interference between sectors. All of this is achieved through a single panel array, producing significant CAPEX and OPEX cost savings for the operator.

CCI antennas are designed and produced to ISO 9001 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

With CCI’s Bi-Sector^TM Wideband Antenna, wireless operators can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation cost
Ideal Antenna Solution for structurally constrained sites, where data throughput, capacity and limited spectrum is a concern
Dual (over split beams) 2x2 MIMO in High Band
Ready for Network Standardization on 4.3-10 connectors

Electrical

Ports	4 × High Band Ports for 1695-2690 MHz
Frequency Range	1695-1880 MHz	1850-1990 MHz	1920-2180 MHz	2300-2400 MHz	2496-2690 MHz
Gain¹	19.5 dBi	19.7 dBi	20.4 dBi	20.9 dBi	21.5 dBi
Gain (Average)²	18.1 dBi	19.0 dBi	19.2 dBi	20.3 dBi	20.5 dBi
Azimuth Beamwidth (-3 dB)	36°	34°	32°	29°	26°
Azimuth Peak Offset	32°	30°	28°	25°	23°
Elevation Beamwidth (-3 dB)	6.5°	6.0°	5.6°	4.6°	4.4°
Electrical Downtilt	0° to 10°	0° to 10°	0° to 10°	0° to 10°	0° to 10°
Elevation Sidelobes (1st Upper)	< -18 dB	< -18 dB	< -18 dB	< -18 dB	< -19 dB
Front-to-Back Ratio @180°	> 35 dB	> 35 dB	> 35 dB	> 35 dB	> 35 dB
Front-to-Back Ratio over ± 20°	> 35 dB	> 35 dB	> 35 dB	> 35 dB	> 35 dB
Cross-Polar Discrimination (at Peak)	> 25 dB	> 25 dB	> 25 dB	> 22 dB	> 23 dB
Cross-Polar Discrimination (at 3 dB)²	17.6 dB	17.0 dB	16.5 dB	14.0 dB	15.6 dB
Beam to Beam Isolation (Average)	> 26 dB	> 27 dB	> 26 dB	> 28 dB	> 28 dB
Cross-Polar Port-to-Port Isolation	> 30 dB	> 30 dB	> 30 dB	> 30 dB	> 30 dB
Voltage Standing Wave Ratio(VSWR)	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1
Passive Intermodulation (2×20W)	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc
Input Power Continuous Wave (CW)	300 watts	300 watts	300 watts	300 watts	300 watts
Polarization	Dual Pol 45°	Dual Pol 45°	Dual Pol 45°	Dual Pol 45°	Dual Pol 45°
Input Impedance	50 ohms	50 ohms	50 ohms	50 ohms	50 ohms
Lightning Protection	DC Ground	DC Ground	DC Ground	DC Ground	DC Ground
¹Peak gain across sub-bands. ²Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D)	59.0×13.8×6.3 in (1498×350×159 mm)
Survival Wind Speed	> 150 mph (> 241 kph)
Front Wind Load	185 lbs (822 N) @ 100 mph (161 kph)
Side Wind Load	97 lbs (432 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area	7.2 ft² (0.7 m²)
Weight (RET Model)*	41.2 lbs (18.7 kg)
Weight (VET model)*	39.2 lbs (17.8 kg)
Connector	4 × 4.3-10 female
Mounting Pole	2 to 5 in (5 to 12 cm)
^* Weight excludes mounting

Bottom View	BSA33R-E5AA	BSA33V-E5AA

Connector Spacing	BSA33R-E5AA	BSA33V-E5AA

Element and RET Configuration	BSA33R-E5AA

Element and VET Configuration	BSA33V-E5AA

Typical Antenna Patterns

For detailed information on additional antenna patterns, contact customer support at


	1850 MHz Azimuth Elevation 5°	1995 MHz Azimuth Elevation 5°

	2610 MHz Azimuth Elevation 5°

Model BSA-RET200		Type 1 Remote Electrical Tilt System (RET)
BSA-RET400		Type 17 Remote Electrical Tilt System (RET)
MBK-02		MBK-02
QPA-CBK-AG-RRU		Bi-Sector antenna with 2 RET to RRU AISG cable kit
QPA-CBK-RA-AG-RRU		Bi-Sector antenna with 2 RET to RRU AISG right angle cable kit
SCU-AISG-P		Portable AISG 2.0 Site Control Unit

Product Information

	Datasheet
	BSA33R-E5AA Connector Spacing Diagram
	BSA33V-E5AA Connector Spacing Diagram
	BSA33R-E5AA RET to Element Configuration
	BSA33V-E5AA VET to Element Configuration
	MBK-02 Installation Guide

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

Antenna Pattern

BSA33RE5A: Text/Planet Format - Default Azimuth

Configuration File

	RET Antenna configuration file update procedure

For Firmware select RET Actuator link below.

BSA-RET200 SA-DC0301
Configuration File	Version
BSA33R-E5A-EH01.BIN	01

BSA-RET200 SA-DC0401E
Configuration File	Version
BSA33R-E5A-EY01.BIN	01

Parts & Accessories

BSA33R-E5AA-K	Five foot (1.5 m), four port, Bi-Sector^TM antenna with left and right azimuth beams covering 1695-2690 MHz. with 4.3-10 female connectors, 2 factor installed BSA-RET200 RET actuators (Type 1 external) and MBK-02 mounting bracket
BSA33R-E5AB-K	Five foot (1.5 m), four port, Bi-Sector^TM antenna with left and right azimuth beams covering 1695-2690 MHz. with 4.3-10 female connectors, 2 factor installed BSA-RET400 RET actuators (Type 17 internal) and MBK-02 mounting bracket
BSA33V-E5AA-K	Five foot (1.5 m), four port, Bi-Sector^TM antenna with left and right azimuth beams covering 1695-2690 MHz. with 4.3-10 female connectors, 2 factor installed manual knobs and MBK-02 mounting bracket
MBK-02	Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200	Type 1 remote electrical tilt actuator
BSA-RET400	Type 17 remote electrical tilt actuator
QPA-CBK-AG-RRU	Two RET antenna to RRU AISG cable kit
QPA-CBK-RA-AG-RRU	Two RET antenna to RRU AISG right angle cable kit

Standards & Compliance

Safety	EN 60950-1, UL 60950-1
Emission	EN 55022
Immunity	EN 55024
Environmental	IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

		PRODUCTS

	Amplifiers
	Antennas
	Co-Siting & Antenna Sharing
	DAS & Small Cell Products
	Fiberoptics
	Filters & Combiners
	PIM Analyzers
	Radios

		ANTENNAS

	Antenna Accessories
	Bi-Sector™
	iDAS
	Multi-Sector/Special Events
	Single Sector Multiport
	Small Cell/oDAS
	Specialty

		FREQUENCY BAND

		NUMBER OF SECTORS

	1
	2 (BSA)

		HEIGHT

	3 ft. (762 - 1066 mm)
	4 ft. (1067 - 1371 mm)
	5 ft. (1372 - 1676 mm)
	6 ft. (1677 - 1981 mm)
	7 ft. (1982 - 2286 mm)
	8 ft. (2287 - 2590 mm)
	9 ft. (2591 - 2896 mm)

		HORIZONTAL BEAMWIDTH

	20° to 30°
	30° to 40°
	50° to 70°

		NUMBER OF PORTS

	4
	6
	8
	10
	12
	>12

		LOW BAND PORTS

	2
	4
	8

		HIGH BAND PORTS

	4
	6
	8
	12
	16
	24

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax

	604-806 MHz
	698-798 MHz
	698-896 MHz
	698-960 MHz
	790-960 MHz
	824-896 MHz
	1695-1880 MHz
	1695-2180 MHz
	1695-2360 MHz
	1695-2690 MHz
	1850-1995 MHz
	2300-2400 MHz
	2300-2690 MHz
	2496-2690 MHz
	1427-1518 MHz
	1427-2200 MHz
	1427-2690 MHz

FILTER BY SELECTION