|
|
||||
| PiMPro Rack Mount Analyzer | PiMPro 900RM | |||
Pattern Viewer |
|
Measurement & Configuration
 |
System Configuration System Configuration is the first data entry point for PiMPro users, where all system and report generation parameters are set. Includes settings for Date and Time, Audio Alarm, RF Power on Time interval, central Data Label management, PiMPro registration information and IP address are all keyed in from this screen. Software updates and screen calibrations are also accessed from this screen. |
|
 |
PIM vs Return Loss PiMPro’s main measurement screen provides instantaneous PIM measurement in both dBc or dBm. The large display flashes to annunciate the presence of RF power at the output connector. Pass/Marginal/Fail Limits, Output Power, Frequency and IM settings originate from this screen. PiMPro’s unique Return Loss diagnostic feature at high transmit (TX) power, quickly points out open cables. |
|
 |
PIM vs Time The PIM vs Time dynamic measurement mode features a graphical representation of PIM as a function of time. Time scale can be set from 10 seconds to 4 minutes. The PiMPro Return Loss feature is also available on this screen. |
|
 |
Frequency Sweep PiMPro displays a swept receive (RX) PIM range by sweeping the TX carriers from end to end within the set frequency band. PIM frequency response is displayed, exposing the worst case PIM level and the contributing frequencies. Users can immediately transfer the graph to the PIM vs Time feature and run a new test to isolate the causes of the specific PIM. |
|
 |
RX Interference With both internal amplifiers set to off, PiMPro performs a spectral analysis sweep, for interfering signals. RX Interference mode provides the added ability to discern PIM from external interfering signals in the receive band. External and internal PIM signals are unlikely to be in phase or simultaneous within PiMPro’s narrow receiver range, therefore, making RX Interference a powerful field diagnostic tool. |
|
 |
Report Generator Report data for all measurement modes can be stored in either, HTML or PDF file format. Users can concatenate a limitless series of measurements with different sector, feeder, color codes, as one single PDF file. Reports can be saved in PiMPro’s internal memory or to external USB memory from the unit’s front panel. |
|
 |
PimPro Eco (Optional) The PiMPro Eco software application automates PIM lab-based measurements performed on the PiMPro Classic and Rack Mount. Users can create and recall test profiles, simultaneously perform frequency and power sweep, create customized reports for distribution as well as control ancillary instruments, such as network analyzers, signal analyzers and power meters for related RF measurements. |
Accessories
| PP-AK-DMDM | Low PIM 7–16 DIN Male to Male Adapter | |
| PP-AK-DFDF | Low PIM 7–16 DIN Female to Female Adapter | |
| PP-AK-DMNF | Low PIM 7–16 DIN Male to N Female Adapter | |
| PP-AK-DMNM | Low PIM 7–16 DIN Male to N Male Adapter | |
| PPT-AK-LOAD | Low PIM Termination Load < -168 dBc with both Male and Female 7–16 DIN | |
| PP-AK-CAB-DMDF | Low PIM Male DIN to Female DIN jumper cable 3/8“ 3 m (10 ft) length | |
| PP-AK-CAB-DMDM | Low PIM Male DIN to Male DIN jumper cable 3/8“ 3 m (10 ft) length | |
 |
PP-AK-PSTAN | PIM Standard Verification Source Tool |
| PP-AK-TORW | Torque Wrench for 7–16 DIN Connector | |
| PP-AK-ADJW | Adjustable Wrench | |
| PP-AK-FIXW | Small 32 mm Wrench for 7–16 DIN | |
| PPT-AK-ALCH | Alcohol Cleaning Kit |
|
|
