|
|
||||
| Dual Band (n25 and n66) ORU | ORU-N25N66-Z05-2 |
|||
Pattern Viewer |
|
LED Overlay
 |
|
||
| LED Overlay |
| Specification | Detail | Value |
| Power Consumption | 25 degree with 100% Load | 1800 W |
| 25 degree with 50% Load | 1170 W | |
| 25 degree with 30% Load | 850 W | |
| 25 degree with 10% Load | 340 W | |
| 100% load with operating temperature | 1930 W | |
| DL Performance | Per port Output Power | 49 dBm max |
| Power Accuracy in Normal Test Environment | -1.2 dB to 0.5 dB | |
| Power Accuracy in Extreme Test Environment | -2.5 dB to 0.5 dB | |
| EVM: QPSK | 17.5% max | |
| EVM: 16QAM | 12.5% max | |
| EVM:64QAM | 8.0% max | |
| EVM: 256QAM | 3.5% max | |
| UL Performance, Reference Sensitivity Level | N25/B25 in normal environment | -105.6 dBm typical |
| N66/B66 in normal environment | -105.6 dBm typical | |
| Main Function Features | Remote Electrical Tilt | Based on AISG 2.0 protocol and o-ran-ald.yang model to communication with the external RET equipment |
| Voltage Standing Wave Ratio Detection | Support VSWR detection for each RF port to check antenna connectivity, there are two types of VSWR alarms: Minor VSWR alarm, RU will keep radiating, the service would be degraded. Critical VSWR alarm, RU would shut off corresponding RF branch. |
|
| External Alarm | Support external device supervision, RU would monitor external alarm port state and send notification to O-RU controller based on o-ran-externalio.yang model when input port state is changed (circuit from open to closed or circuit from closed to open). RU can also report external alarm to O-RU controller once input port circuit from open to closed via customized fault. |
|
| Cascading | Not Supported | |
| Security | Support TPM2.0 | |
| PAP | Support PA protection functions, including the scenario: SFP port abnormal disconnect External Power supply abnormal Abnormal signal generated |
|
|
