Communication Components Inc.

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI Customer Portal

CCI

News

Support

Multi-Port Antennas

In the Americas

Sales


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Customer Service


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Technical Support


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Datasheet

Multi-Band Twelve Port Antenna

TPA65R-BU8D

Eight foot (2.4 m) multiband, twelve port antenna with a 65° azimuth beamwidth covering 698-896 MHz and 1695-2400 MHz frequencies
Eight high band ports covering 1695-2400 MHz and four low band ports covering 698-896 MHz in a single antenna enclosure
Innovative Low and High Band Array configuration allows for 4T4R (4x4 MIMO) on Low Band and Dual 4T4R (4x4 MIMO) High Band Arrays, using full length arrays (non stacked), all in under a 20.7” (525 mm) width enclosure, an Industry First
Full Spectrum Compliance for WCS and AWS-3 frequencies and Band 14 Operations
Array configuration allows for 4T4R (4X4 MIMO) on Low Band, essential for Band 14 Operations
LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity
LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance
Exceeds minimum PIM performance requirements
Equipped with new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
Equipped with 3 field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) Controllers (Type 1 External)
Ordering options for External RET Controllers (Type 1) or Internally Integraged RET Controllers (Type 17)

Overview

The CCI 12-Port multiband array is a twelve port antenna, with eight wide band ports covering 1695-2400 MHz and four low band ports covering 698-896 MHz. The antenna provides the capability to deploy Dual 4×4 Multiple-input Multiple-output (MIMO) in the high band and 4X4 Multiple-input Multiple-output (MIMO) across low band ports. The CCI 12-Port allows independent tilt control between the low band ports and high band ports and independent tilt control between left and right antenna arrays.

In this three RET configuration, the 1st RET is dedicated for the four Low Band ports. The 2nd RET is dedicated for the four Left High Band ports and the 3th RET is dedicated for the four Right High Band ports. This RET arrangement allows for complete flexibility in coverage control between left and right antenna arrays.

CCI antennas are designed and produced to ISO 9001 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

Dual 4×4 MIMO for the High Band and 4X4 MIMO Low Band ports
Ready for Network Standardization on 4.3-10 DIN connectors
With CCI’s multiband antennas, wireless providers can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs

Electrical


Ports	4 × Low Band Ports for 698-896 MHz
Frequency Range	698-806 MHz	824-896 MHz
Gain¹	15.6 dBi	16.6 dBi
Gain (Average)²	14.6 dBi	15.6 dBi
Azimuth Beamwidth (-3dB)	74°	63°
Elevation Beamwidth (-3dB)	9.5°	8.0°
Electrical Downtilt	2° to 12°	2° to 12°
Elevation Sidelobes (1st Upper)	<-19 dB	<-18 dB
Front-to-Back Ratio @180°	> 35 dB	> 35 dB
Front-to-Back Ratio ±20°	> 32 dB	> 32 dB
Cross-Polar Discrimination at Peak	> 25 dB	> 25 dB
Cross-Polar Discrimination at Sector²	11.2 dB	10.9 dB
Cross-Polar Port-to-Port Isolation	> 25 dB	> 25 dB
Voltage Standing Wave Ratio (VSWR)	< 1.5:1	< 1.5:1
Passive Intermodulation (2×20W)	≤ -153 dBc	≤ -153 dBc
Input Power Continuous Wave (CW)	500 watts	500 watts
Polarization	Dual Linear 45°	Dual Linear 45°
Input Impedance	50 ohms	50 ohms
Lightning Protection	DC Ground	DC Ground
¹Peak gain across sub-bands. ²Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.


Ports	8 × High Band Ports for 1695-2400 MHz
Frequency Range	1695-1880 MHz	1850-1990 MHz	1920-2180 MHz	2300-2400 MHz
Gain¹	18.0 dBi	18.1 dBi	18.3 dBi	18.0 dBi
Gain (Average)²	16.7 dBi	17.1 dBi	17.3 dBi	16.8 dBi
Azimuth Beamwidth (-3dB)	71°	67°	67°	62°
Elevation Beamwidth (-3dB)	5.7°	5.1°	4.7°	4.1°
Electrical Downtilt	0° to 8°	0° to 8°	0° to 8°	0° to 8°
Elevation Sidelobes (1st Upper)	<-18 dB	<-18 dB	<-17 dB	<-16 dB
Front-to-Back Ratio @180°	> 35 dB	> 35 dB	> 35 dB	> 35 dB
Front-to-Back Ratio ±20°	> 32 dB	> 32 dB	> 32 dB	> 32 dB
Cross-Polar Discrimination at Peak	> 19 dB	> 18 dB	> 20 dB	> 21 dB
Cross-Polar Discrimination at Sector²	11.0 dB	9.1 dB	9.9 dB	8.0 dB
Cross-Polar Port-to-Port Isolation	> 25 dB	> 25 dB	> 25 dB	> 25 dB
Voltage Standing Wave Ratio (VSWR)	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1
Passive Intermodulation (2×20W)	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc
Input Power Continuous Wave (CW)	300 watts	300 watts	300 watts	300 watts
Polarization	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°
Input Impedance	50 ohms	50 ohms	50 ohms	50 ohms
Lightning Protection	DC Ground	DC Ground	DC Ground	DC Ground
¹Peak gain across sub-bands. ²Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6.

Mechanical

Dimensions (L×W×D)	96.0×20.7×7.7 in (2438×525×197 mm)
Survival Wind Speed	> 150 mph (> 241 kph)
Front Wind Load	457 lbs (2033 N) @ 100 mph (161 kph)
Side Wind Load	209 lbs (929 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area	17.9 ft² (1.7 m²)
Weight *	87.1 lbs (39.5 kg)
Package Dimensions (LxWxD)	104.3x28.7x16.9 in (2650x730x430 mm)
Package Weight	145 lbs (65.8 kg)
Connector	12 × 4.3-10 female
Mounting Pole	2 to 5 in (5 to 12 cm)

* Weight excludes mounting kit

Bottom View	TPA65R-BU8DA

Connector Spacing	TPA65R-BU8DA

RET to Element Configuration	TPA65R-BU8DA Element and RET configuration (Type 1 External RET)

Typical Antenna Patterns

For detailed information on additional antenna patterns, contact customer support at


	734 MHz Azimuth with Elevation 7°	880 MHz Azimuth with Elevation 7°


	1720 MHz Azimuth with Elevation 4°	2155 MHz Azimuth with Elevation 4°

MBK-16		MBK-16 Mounting Kit with fixed 0° mechanical tilt
MBK-01		MBK-01 Mounting Kit with 0° - 10° mechanical tilt
BSA-RET200		Type 1 Remote Electrical Tilt System (RET)
BSA-RET400		Type 17 Remote Electrical Tilt System (RET)
DPA-CBK-AG-RRU		AISG Cable set for three RET antenna
DPA-CBK-RA-AG-RRU		AISG Right Angle Cable set for three RET Antenna
AISGC-M-F-10FT		10 Ft (3 m) Male/Female RRU to Antenna AISG cable
SCU-AISG-P		Portable AISG 2.0 Site Control Unit

Product Information

	Datasheet
	TPA65R-BU8DA Connector Spacing Diagram
	TPA65R-BU8DA Antenna/RET Config Diagram
	MBK-16 Installation Guide
	MBK-01 Installation Guide

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

Antenna Pattern

TPA65RBU8D: Text/Planet Format - Default Azimuth

Configuration File

	RET Antenna configuration file update procedure

For Firmware select RET Actuator link below.

BSA-RET200 SA-DC0301
Configuration File	Version
TPA65RBU8D-HB01.BIN	01
TPA65RBU8D-HU01.BIN	01

BSA-RET200 SA-DC0401E
Configuration File	Version
TPA65RBU8D-YB01.BIN	01
TPA65RBU8D-YU01.BIN	01

Parts & Accessories

TPA65R-BU8DA-K	Eight foot (2.4 m) antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 3 factory installed BSA-RET200 RET actuators (Type 1 external)and MBK-16 mounting bracket
TPA65R-BU8DB-K	Eight foot (2.4 m) antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 3 factory installed BSA-RET400 RET actuators (Type 17 internal) and MBK-16 mounting bracket
MBK-16	Mounting bracket kit (top and bottom) with fixed 0° mechanical tilt
MBK-01	Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200	Type 1 Remote electrical tilt actuator
BSA-RET400	Type 17 Remote electrical tilt actuator
DPA-CBK-AG-RRU	Antenna with 3 RET (Type 1) to RRU AISG cable kit
DPA-CBK-RA-AG-RRU	Antenna with 3 RET (Tpye 1)to RRU AISG right angle cable kit
AISGC-M-F-xFT AISGC-M-F-10FT	10 Ft (3 m) Male/Female RRU to Antenna AISG cable

Standards & Compliance

Safety	EN 60950-1, UL 60950-1
Emission	EN 55022
Immunity	EN 55024
Environmental	IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

		PRODUCTS

	Amplifiers
	Antennas
	Co-Siting & Antenna Sharing
	DAS & Small Cell Products
	Fiberoptics
	Filters & Combiners
	PIM Analyzers
	Radios

		ANTENNAS

	Antenna Accessories
	Bi-Sector™
	iDAS
	Multi-Sector/Special Events
	Single Sector Multiport
	Small Cell/oDAS
	Specialty

		FREQUENCY BAND

		HEIGHT

	2 ft. (458 - 761 mm)
	3 ft. (762 - 1066 mm)
	4 ft. (1067 - 1371 mm)
	5 ft. (1372 - 1676 mm)
	6 ft. (1677 - 1981 mm)
	8 ft. (2287 - 2590 mm)
	9 ft. (2591 - 2896 mm)

		HORIZONTAL BEAMWIDTH

	30° to 40°
	40° to 50°
	50° to 70°

		NUMBER OF PORTS

	2
	4
	6
	8
	10
	12
	>12

		LOW BAND PORTS

	2
	4
	6

		HIGH BAND PORTS

	2
	4
	6
	8
	24

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax

	604-806 MHz
	698-798 MHz
	698-896 MHz
	698-960 MHz
	790-960 MHz
	824-896 MHz
	1695-1880 MHz
	1695-2180 MHz
	1695-2360 MHz
	1695-2690 MHz
	1850-1995 MHz
	2300-2400 MHz
	2300-2690 MHz
	2496-2690 MHz
	3300-3800 MHz
	1427-1518 MHz
	1427-2200 MHz
	1427-2690 MHz

FILTER BY SELECTION