Communication Components Inc.

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI Customer Portal

CCI

News

Support

Multi-Port Antennas

In the Americas

Sales


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Customer Service


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Technical Support


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Datasheet

TriBand Eight Port Antenna

OPA65R-KE4D

Four foot (1.2 m) TriBand, eight port antenna with a 65° azimuth beamwidth covering 698-960 MHz and 1695-2690 MHz frequencies
Four wide high band ports covering 1695-2690 MHz and four wide low band ports covering 698-960 MHz in a single antenna enclosure
Full Spectrum Compliance 698-960 MHz / 1695-2690 MHz
Array configuration allows for 4T4R (4X4 MIMO) on Low Band and 4T4R (4X4 MIMO) on High Band
LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity
LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance
Exceeds minimum PIM performance requirements
Equipped with new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
Equipped with 2 field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET) Controllers (Type 1 External)

Overview

The CCI Multi-Port TriBand array is a eight port antenna, with four wide high band ports covering 1695-2690 MHz and four wide low band ports covering 698-960 MHz. The antenna provides the capability to deploy 4×4 Multiple-input Multiple-output (MIMO) in the high band and 4X4 Multiple-input Multiple-output (MIMO) in low band. The CCI 8-Port allows independent tilt control between the low band ports and high band ports.

In this two RET configuration, the 1st RET is dedicated for the four Low Band ports and the 2rd RET is for the four High Band ports.

CCI antennas are designed and produced to ISO 9001 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

4×4 MIMO for the High Band and 4X4 MIMO Low Band ports
Ready for Network Standardization on 4.3-10 DIN connectors
With CCI’s TriBand antennas, wireless providers can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs

Electrical

Ports	4 × Low Band Ports for 698-960 MHz
Frequency Range	698-806 MHz	790-862 MHz	824-896 MHz	880-960 MHz
Gain	13.2 dBi	13.6 dBi	14.0 dBi	14.3 dBi
Azimuth Beamwidth (-3dB)	73°	68°	62°	55°
Elevation Beamwidth (-3dB)	20.1°	18.5°	17.7°	16.5°
Electrical Downtilt	2° to 16°	2° to 16°	2° to 16°	2° to 16°
Elevation Sidelobes (1st Upper)	<-16 dB	<-16 dB	<-17 dB	<-17 dB
Front-to-Back Ratio @180°	> 32 dB	> 32 dB	> 32 dB	> 32 dB
Cross-Polar Discrimination at Peak	> 25 dB	> 25 dB	> 25 dB	> 25 dB
Cross-Polar Port-to-Port Isolation	> 25 dB	> 25 dB	> 25 dB	> 25 dB
Voltage Standing Wave Ratio (VSWR)	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1
Passive Intermodulation (2×20W)	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc
Input Power Continuous Wave (CW)	500 watts	500 watts	500 watts	500 watts
Polarization	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°
Input Impedance	50 ohms	50 ohms	50 ohms	50 ohms
Lightning Protection	DC Ground	DC Ground	DC Ground	DC Ground

BASTA Electrical Specifications
Frequency Range	698-806 MHz	790-862 MHz	824-896 MHz	880-960 MHz
Gain over all Tilts (dBi)	12.2	12.7	13.0	13.4
Gain over all Tilts Tolerance (dB)	0.6	0.5	0.5	0.8
Gain at Low-Tilt (dBi)	12.4	13.0	13.3	13.8
Gain at Mid-Tilt (dBi)	12.3	12.8	13.1	13.5
Gain at High-Tilt (dBi)	12.0	12.5	12.8	12.9
Azimuth Beamwidth Tolerance (°)	12.5	8.0	8.3	8.0
Elevation Beamwidth Tolerance (°)	1.4	0.9	1.2	1.2
Electrical Downtilt Deviation (°)	1.7	1.6	1.6	1.6
First Upper Sidelobe Suppression (dB)	12.8	13.2	13.4	13.4
Front-to-Back Ratio over ±20° (dB)	23.8	25.2	25.1	24.9
Cross-polar Discrimination at ±60° (dB)	14.6	12.9	11.4	7.7
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6. All specifications are subject to change without notice.

Ports	4 × High Band Ports for 1695-2690 MHz
Frequency Range	1695-1880 MHz	1850-1990 MHz	1920-2180 MHz	2300-2400 MHz	2496-2690 MHz
Gain	16.4 dBi	16.4 dBi	16.7 dBi	17.0 dBi	17.1 dBi
Azimuth Beamwidth (-3dB)	68°	69°	70°	59°	59°
Elevation Beamwidth (-3dB)	8.2°	7.3°	6.7°	5.9°	5.6°
Electrical Downtilt	2° to 10°	2° to 10°	2° to 10°	2° to 10°	2° to 10°
Elevation Sidelobes (1st Upper)	<-16 dB	<-16 dB	<-16 dB	<-16 dB	<-16 dB
Front-to-Back Ratio @180°	> 35 dB	> 35 dB	> 35 dB	> 35 dB	> 35 dB
Cross-Polar Discrimination at Peak	> 18 dB	> 17 dB	> 18 dB	> 18 dB	> 17 dB
Cross-Polar Port-to-Port Isolation	> 25 dB	> 25 dB	> 25 dB	> 25 dB	> 25 dB
Voltage Standing Wave Ratio (VSWR)	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1
Passive Intermodulation (2×20W)	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc
Input Power Continuous Wave (CW)	300 watts	300 watts	300 watts	300 watts	300 watts
Polarization	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°
Input Impedance	50 ohms	50 ohms	50 ohms	50 ohms	50 ohms
Lightning Protection	DC Ground	DC Ground	DC Ground	DC Ground	DC Ground

BASTA Electrical Specifications
Frequency Range	1695-1880 MHz	1850-1990 MHz	1920-2180 MHz	2300-2400 MHz	2496-2690 MHz
Gain over all Tilts (dBi)	15.5	15.9	16.1	16.6	16.1
Gain over all Tilts Tolerance (dB)	0.6	0.5	0.5	0.3	0.8
Gain at Low-Tilt (dBi)	15.4	15.7	15.9	16.5	15.7
Gain at Mid-Tilt (dBi)	15.5	16.0	16.1	16.7	16.2
Gain at High-Tilt (dBi)	15.6	16.1	16.3	16.6	16.3
Azimuth Beamwidth Tolerance (°)	5.1	3.0	3.3	8.7	7.2
Elevation Beamwidth Tolerance (°)	0.6	0.5	0.6	0.3	0.5
Electrical Downtilt Deviation (°)	2.0	1.8	1.6	1.7	1.8
First Upper Sidelobes Suppression (dB)	12.9	13.7	13.6	12.7	12.7
Upper Sidelobe Suppression Peak to 20°(dB)	12.9	12.5	12.0	11.7	12.2
Front-to-Back Ratio over ±20° (dB)	24.8	24.6	24.4	25.2	24.3
Cross-polar Discrimination at ±60° (dB)	9.4	7.7	8.1	8.9	8.8
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V9.6. All specifications are subject to change without notice.

Mechanical

Dimensions (L×W×D)	48.0×20.7×7.7 in (1220×525×197 mm)
Survival Wind Speed	> 150 mph (> 241 kph)
Front Wind Load	212 lbs (943 N) @ 100 mph (161 kph)
Side Wind Load	90 lbs (402 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area	8.3 ft² (0.8 m²)
Weight *	46.3 lbs (21.0 kg)
Packaging Dimensions (L×W×D)	60.2×26.9×15.0 in (1530×683×381 mm)
Packaged Weight ~	79.4 lbs (36.0 kg)
Connector	8 × 4.3-10 female
Mounting Pole	2 to 5 in (5 to 12 cm)

* Weight excludes mounting

Bottom View

Connector Spacing

RET to Element Configuration	OPA65R-KE4DA Element and RET configuration (Type 1 External RET)

Typical Antenna Patterns

For detailed information on additional antenna patterns, contact customer support at


	722 MHz Azimuth with Elevation 9°	824 MHz Azimuth with Elevation 9°

	880 MHz Azimuth with Elevation 9°


	1850 MHz Azimuth with Elevation 5°	2155 MHz Azimuth with Elevation 5°

	2500 MHz Azimuth with Elevation 5°

MBK-02		MBK-02 Mounting Kit
BSA-RET200		Remote Electrical Tilt System (RET)
CBK-AG-RRU-001		AISG Cable set for two RET antenna
CBK-RA-AG-RRU-005		AISG Right Angle Cable set for two RET Antenna
SCU-AISG2-P		Portable AISG 2.0 Site Control Unit

Product Information

	Datasheet
	OPA65R-KE4DA Connector Spacing Diagram
	OPA65R-KE4DA Antenna/RET Config Diagram
	MBK-01 Installation Guide

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

Antenna Pattern

OPA65RKE4D: Text/Planet Format - Default Azimuth

Configuration File

	RET Antenna configuration file update procedure

For Firmware select RET Actuator link below.

BSA-RET200 SA-DC0301
Configuration File	Version
OPA65-KE4D-HK01.BIN	01
OPA65-KE4D-HE02.BIN	02

BSA-RET200 SA-DC0401E
Configuration File	Version
OPA65-KE4D-YK02.BIN	02
OPA65-KE4D-YE02.BIN	02

Parts & Accessories

OPA65R-KE4DA-K	Four foot (1.2 m) TriBand antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 2 factory installed BSA-RET200 RET actuators ( Type 1 external) and MBK-02 mounting bracket
MBK-02	Mounting bracket kit (top and bottom) with 0° to 10° mechanical tilt adjustment
BSA-RET200	Remote electrical tilt actuator
CBK-AG-RRU-001	RRU AISG cable kit for two RET antenna
CBK-RA-AG-RRU-005	RRU AISG right angle cable kit for two RET antenna

Standards & Compliance

Safety	EN 60950-1, UL 60950-1
Emission	EN 55022
Immunity	EN 55024
Environmental	IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

		PRODUCTS

	Amplifiers
	Antennas
	Co-Siting & Antenna Sharing
	DAS & Small Cell Products
	Fiberoptics
	Filters & Combiners
	PIM Analyzers
	Radios

		ANTENNAS

	Antenna Accessories
	Bi-Sector™
	iDAS
	Multi-Sector/Special Events
	Single Sector Multiport
	Small Cell/oDAS
	Specialty

		FREQUENCY BAND

		HEIGHT

	2 ft. (458 - 761 mm)
	3 ft. (762 - 1066 mm)
	4 ft. (1067 - 1371 mm)
	5 ft. (1372 - 1676 mm)
	6 ft. (1677 - 1981 mm)
	8 ft. (2287 - 2590 mm)
	9 ft. (2591 - 2896 mm)

		HORIZONTAL BEAMWIDTH

	30° to 40°
	40° to 50°
	50° to 70°

		NUMBER OF PORTS

	2
	4
	6
	8
	10
	12
	>12

		LOW BAND PORTS

	2
	4
	6

		HIGH BAND PORTS

	2
	4
	6
	8
	24

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax

	604-806 MHz
	698-798 MHz
	698-896 MHz
	698-960 MHz
	790-960 MHz
	824-896 MHz
	1695-1880 MHz
	1695-2180 MHz
	1695-2360 MHz
	1695-2690 MHz
	1850-1995 MHz
	2300-2400 MHz
	2300-2690 MHz
	2496-2690 MHz
	3300-3800 MHz
	1427-1518 MHz
	1427-2200 MHz
	1427-2690 MHz

FILTER BY SELECTION