Communication Components Inc.

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

Overview

Applications

Electrical

Mechanical

Typical Antenna Patterns

Product Information

Software/Firmware

Parts & Accessories

Standards & Compliance

Certifications

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI

News

Support

Solutions

Products

Services

Resources

Support

CCI Portal Login

CCI Customer Portal

CCI

News

Support

Multi-Port Antennas

In the Americas

Sales


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Customer Service


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Technical Support


+1 (201) 342-3338 phone
+1 (201)-342-3339 fax

89 Leuning Street
South Hackensack, NJ 07606
USA

Datasheet

LowBand Antenna

2PA65R-K8A

Eight foot (2.4 m), two port antenna with a 65° azimuth beamwidth covering 698-960 MHz frequencies
Two wide low band ports covering 698-960 MHz in a single antenna
Full Spectrum Compliance 698-960 MHZ
LTE Optimized FBR and SPR performance, providing for an efficient use of valuable radio capacity
LTE Optimized Boresight and Sector XPD and USL performance, essential for LTE Performance
Exceeds minimum PIM performance requirements
4.3-10 connector, which are 40% smaller than traditional 7/16 DIN connector

Overview

The CCI antenna is a two port antenna, with two wide low band ports covering 698-960 MHz. The CCI antenna provides the capability to deploy 2x2 Multiple-input Multiple-output in the low band.

CCI antennas are designed and produced to ISO 9001 certification standards for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

2×2 MIMO for the low band
Ready for Network Standardization on 4.3-10 connectors
With CCI’s antennas, wireless providers can connect multiple platforms to a single antenna, reducing tower load, lease expense, deployment time and installation costs

Electrical

Ports	2 × Low Band Ports for 698-960 MHz
Frequency Range	698-806 MHz	790-862 MHz	824-896 MHz	880-960 MHz
Gain	15.9 dBi	16.4 dBi	16.6 dBi	16.5 dBi
Azimuth Beamwidth (-3dB)	70°	75°	74°	69°
Elevation Beamwidth (-3dB)	9.2°	8.2°	7.9°	7.3°
Electrical Downtilt	0° to 10°	0° to 10°	0° to 10°	0° to 10°
Elevation Sidelobes (1st Upper)	<-20 dB	<-20 dB	<-19 dB	<-18 dB
Front-to-Back Ratio @180°	> 28 dB	> 30 dB	> 30 dB	> 30 dB
Cross-Polar Discrimination at Peak	> 24 dB	> 24 dB	> 22 dB	> 22 dB
Cross-Polar Port-to-Port Isolation	> 25 dB	> 25 dB	> 25 dB	> 25 dB
Voltage Standing Wave Ratio (VSWR)	< 1.5:1	< 1.5:1	< 1.5:1	< 1.5:1
Passive Intermodulation (2×20W)	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc	≤ -153 dBc
Input Power Continuous Wave (CW)	500 watts	500 watts	500 watts	500 watts
Polarization	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°	Dual Linear 45°
Input Impedance	50 ohms	50 ohms	50 ohms	50 ohms
Lightning Protection	DC Ground	DC Ground	DC Ground	DC Ground

BASTA Electrical Specifications*
Frequency Range	694-806 MHz	790-862 MHz	824-896 MHz	880-960 MHz
Gain over all Tilts (dBi)	15.6	15.8	16.1	16.2
Gain over all Tilts Tolerance (dB)	0.4	0.3	0.4	0.3
Gain at Low-Tilt (dBi)	15.7	15.8	16.1	16.2
Gain at Mid-Tilt (dBi)	15.7	15.9	16.2	16.3
Gain at High-Tilt (dBi)	15.4	15.8	15.9	16.1
Azimuth Beamwidth Tolerance (°)	3.5	2.3	4.1	3.2
Elevation Beamwidth Tolerance (°)	0.9	0.5	0.5	0.6
Electrical Downtilt Deviation (°)	0.5	0.4	0.4	0.5
First Upper Sidelobe Suppression (dB)	14.7	15.2	14.9	15.1
Upper Sidelobe Suppression Peak to 20° (dB)	15.6	15.2	14.9	15.2
Front-to-Back Ratio over ±20° (dB)	24.7	27.7	27.8	28.4
Cross-polar Discrimination at ±60° (dB)	9.3	9.1	9.1	9.3
* Electrical specifications follow document "Recommendation on Base Station Antenna Standards" (BASTA) V11.1. All specifications are subject to change without notice.

Mechanical

Dimensions (L×W×D)	96.0×11.7×8.3 in (2439×297×211 mm)
Survival Wind Speed	> 150 mph (> 241 kph)
Front Wind Load¹	175 lbf @ 100 mph 780 N @ 161 kph
Side Wind Load¹	139 lbf @ 100 mph 617 N @ 161 kph
Effective Projective Area (EPA), Front¹	7.0 ft² (0.6 m²)
Weight *	49.8 lbs (22.6 kg)
RF Connector	2 × 4.3-10 female
Mounting Pole	2 to 5 in (5 to 12 cm)
¹Windload values calculated using CFD analysis * Weight excludes mounting

Bottom View	2PA65R-K8A

Connection Spacing Diagram	2PA65R-K8A

RET to Element Configuration	2PA65R-K8AA Element and RET configuration

Typical Antenna Patterns

For detailed information on additional antenna patterns, contact customer support at


	710 MHz Azimuth with Elevation 5°	806 MHz Azimuth with Elevation 5°


	880 MHz Azimuth with Elevation 5°	945 MHz Azimuth with Elevation 5°

MBK-01		MBK-01 Mounting Kit with 0° - 10° mechanical tilt
MBK-16		MBK-16 Mounting Kit with fixed 0° mechanical tilt
BSA-RET400		Remote Electrical Tilt System (RET)
AISGC-M-F-10FT		10 Foot (3 M) Male/Female AISG cable
SCU-AISG-P		Portable AISG 2.0 Site Control Unit

Product Information

	Datasheet
	2PA65R-K8AA Connector Spacing Diagram
	2PA65R-K8AA Antenna/RET Config Diagram
	MBK-01 Installation Guide
	MBK-16 Installation Guide

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

Antenna Pattern

2PA65RK8A: Text/Planet Format - Default Azimuth

Configuration File

	RET Antenna configuration file update procedure

For Firmware select RET Actuator link below.

BSA-RET400 SA-DC0401
Configuration File	Version
Y004512R1.BIN	2

Parts & Accessories

2PA65R-K8AA-K	Eight foot (2.4 m) LowBand antenna with 65° azimuth beamwidth, 4.3-10 female connectors, 1 factory installed BSA-RET400 RET actuators and MBK-01 mounting bracket
MBK-01	MBK-01 Mounting Kit with 0° - 10° mechanical tilt
MBK-16	MBK-16 Mounting Kit with fixed 0° mechanical tilt
BSA-RET400	Type 17 Internal remote electrical tilt actuator
AISGC-M-F-xFT AISGC-M-F-10FT	10 Ft (3 m) Male/Female RRU to Antenna AISG cable

Standards & Compliance

Safety	EN 60950-1, UL 60950-1
Emission	EN 55022
Immunity	EN 55024
Environmental	IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14, IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64, GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001

	Interactive Pattern Viewer
	CCI Interactive Pattern Viewer Instructions

		PRODUCTS

	Amplifiers
	Antennas
	Co-Siting & Antenna Sharing
	DAS & Small Cell Products
	Fiberoptics
	Filters & Combiners
	PIM Analyzers
	Radios

		ANTENNAS

	Antenna Accessories
	Bi-Sector™
	iDAS
	Multi-Sector/Special Events
	Single Sector Multiport
	Small Cell/oDAS
	Specialty

		FREQUENCY BAND

		HEIGHT

	2 ft. (458 - 761 mm)
	3 ft. (762 - 1066 mm)
	4 ft. (1067 - 1371 mm)
	5 ft. (1372 - 1676 mm)
	6 ft. (1677 - 1981 mm)
	8 ft. (2287 - 2590 mm)
	9 ft. (2591 - 2896 mm)

		HORIZONTAL BEAMWIDTH

	30° to 40°
	40° to 50°
	50° to 70°

		NUMBER OF PORTS

	2
	4
	6
	8
	10
	12
	>12

		LOW BAND PORTS

	2
	4
	6

		HIGH BAND PORTS

	2
	4
	6
	8
	24

89 Leuning Street

South Hackensack, NJ 07606

+1 (201) 342-3338

+1 (201) 342-3339 fax

	604-806 MHz
	698-798 MHz
	698-896 MHz
	698-960 MHz
	790-960 MHz
	824-896 MHz
	1695-1880 MHz
	1695-2180 MHz
	1695-2360 MHz
	1695-2690 MHz
	1850-1995 MHz
	2300-2400 MHz
	2300-2690 MHz
	2496-2690 MHz
	3300-3800 MHz
	1427-1518 MHz
	1427-2200 MHz
	1427-2690 MHz

FILTER BY SELECTION